Last Updated: 12/02/2024, 12:30:03
Use a good quality car wash liquid. Wash from the top down. Use a clean white terrycloth face towel or microfiber wash mitt - be sure to remove the tag to prevent scratching. If you drop your wash cloth on the ground, don't try to rinse it out - use another one. To help speed the drying process, sheet rinse water onto the paint rather than spraying. Dry with a towel. Wash wheels and tires separately using towels, sponges, brushes, etc. reserved for use with wheels and tires.
After drying the car, walk around looking for contaminants bonded to the paint (e.g. tar, bug jerky…) that needs to be removed before you start the polish and prep step. Remove adhered contaminants using body solvent (a hazardous chemical item - wear gloves and apply carefully).
Use good quality materials with clean applicators and clean towels to remove residue. As for using Paint Cleaning Clay, Be sure to follow the manufacturer's recommendation for use. (Note that clay does remove contaminants from paint. However, the problem with clay is that the contaminants you remove end up in the clay and you can end up putting contaminants back on the paint if you don't replace your clay on a periodic basis.)
The choice of wax depends on the normal use of the car. Zymol's Hard Carbon Wax produces a superior shine, but requires more rigorous application effort. For daily drivers, which require more frequent cleaning, prep, and waxing, Griot's "Best of Show" Carnauba Wax is an excellent choice, as it produces a glistening shine, is easy to use, and provides months of paint protection.. "Liquid Gloss Poly Wax" by Griot's is another good option and delivers unparalleled protection.
The last step is dressing items like bumper trim, door handles. Use caution when applying any product. We like another Griot's Car Care product… "Vinyl & Rubber Dressing".
Using the right materials is important. That means a clean, good quality cloth or special applicator pads when applying cleaners, polishes, and wax. Always use good quality cloths for removing products, and use a micro-fiber cloth for the final polish and for touch up with detail spray. Always work one small section at a time. Avoid circular motion when applying and removing cleaner, polish or wax - use an aerodynamic front-to-back motion and apply moderate pressure. Be sure to thoroughly remove all residue. One more thing - use the recommended detailing spray with a clean cloth to remove bird droppings from your paint as soon as you can - be a little cautious as some bird droppings can contain gritty material that may scratch your paint if you're not careful.
Dirty towels and cloths may be washed and dried as you would wash similar items that you use in your household with one exception - never use fabric softener! Also, never put your cleaning towels and rags away dirty - toss them in the wash so they're ready for your next session. For those who prefer a little help with preparation, polishing, and waxing, you may consider purchasing a good quality random-orbital buffer (Griot's Garage Car Care Products or equivalent). These machines are somewhat expensive, but a random-orbital buffer will help you avoid burns and other problems that can happen all too easily with standard sanders/buffers. When using a buffer, be sure to use the appropriate applicator and polishing pads.
Start with about a gallon of water in a bucket. Add a capful of car shampoo and a dash of Murphy's Oil Soap. Use a small, clean terry towel (facecloth) and start near the front. Work your way around the engine bay, cleaning one area at a time. Use Griot's "Engine Cleaner" as needed. For baked-on grease and dried oil, Griot's offers a product called "Oil & Grease Cleaner". In general, it's not a good idea to try and remove Cosmoline (a waxy yellowish substance) on engine parts - its presence won't hurt during judging, and it's really difficult to completely remove. For corroded parts (fasteners, fittings, etc.) use 0000 steel wool to remove the corrosion, polished parts look good to Concours judges. Don't forget to clean inside the fan shroud and other areas which the judges may be able to reach into during their search for less-than-showroom clean surfaces. Replace small soft parts that are hard to clean or that have deteriorated. Don't use dressing on hoses.
Use good quality cleaning products such as Lexol or Griot's Garage products. Apply cleaners and preservatives by spraying them on a good, clean cloth. Wipe surfaces clean. Buff treated surfaces with a separate clean cloth.
Use "Vinyl & Rubber Dressing" on non-leather surfaces such as the dash and door panels. Do not use ArmorAll because it contains silicon, which produces a quick shine but can react with, and degrade plastics over time. So, if you plan to keep your car a long time, avoid using ArmorAll.
When spot-cleaning carpeting, apply the cleaning product carefully, and blot the spot; do not rub it, as rubbing may just spread the dirt or stain around and just make things worse. Deep cleaning all of the carpeting is best done with an (expensive) Automotive Carpet Extractor - leave this to a professional.
Use a good quality, clear cleaner such as "Foaming Glass Cleaner" or "Window Cleaner" available from Griot's Garage. Use only lint-free, high-fiber content paper products or cloth towels.
The preparation advice in this document (including products and tools) is our own personal advice to help you prepare your Porsche for a Concours event. Proper car care can be complicated by different types of materials (interior/exterior), types of paint work and previous chemicals/products used on your car. All care has been taken in creating this information, but when in doubt always use common sense.
These always vary by participant, but here's a good start:
